INTERNATIONAL RESOURCE FOR TECHNOLOGY AND APPLICATIONS IN THE GLOBAL PHOTONICS INDUSTRY

HOME  |   CURRENT ISSUE  |   PHOTONICS RESOURCES  |   PRODUCTS  |   WEB EXCLUSIVES  |   LARRY'S VC VIEW BLOG  |   JOBS  |   EVENTS  |   INDUSTRY LINKS

Top

WEBCASTS  |   WHITEPAPERS  |   SPONSORED CONTENT  |   NEWSLETTER ARCHIVES

SUBSCRIBE: e-newsletter magazines

Advertise  | About Us  | Contact Us  | Site Map

advanced

Home >
Issue Archive >
Laser Focus World >
Article Display

Left1

Print this article

Email this article

| Add RSS Feed

IMAGING DETECTORS: Innovative CMOS circuitry helps detectors resist radiation damage

Scientists at Rochester Institute of Technology (RIT) and the University of Rochester (both Rochester, NY) have been awarded $592,000 from the NASA Planetary Instrument Definition and Development Program to design, build, and test, in collaboration with NASA scientists, an imaging detector specifically for use in harsh extraterrestrial environments.

Goals for the device include smaller size, less power consumption, and more radiation tolerance than technology currently in use. Achievement of these goals will lead to lower mission costs and greater scientific productivity, notes Donald Figer, director of the Rochester Imaging Detector Laboratory (RIDL) at RIT and lead scientist on the project. “But, ultimately, radiation immunity is the focus,” he says.

High-energy particles permeate space and can damage electronics by disrupting sites in the crystal lattice of a semiconductor, Figer explains. Once damaged, the material has a higher dark current and a greater probability of trapping photogenerated charge. Together, these effects reduce the sensitivity of a detector, ultimately limiting mission lifetime. One possible solution would be to add heavy shielding to block radiation, but the resulting costs in weight, and potentially in thermal mass, would be prohibitive.

Figer’s team has set out to develop a new detector design based on a marriage of beneficial qualities from CCD and CMOS detectors. CCD detectors, which are most often used for space missions, offer very low noise, but the desirable noise performance is gradually degraded by radiation damage. While CMOS detectors offer intrinsically higher radiation resistance than CCDs, they start out with a relatively high read noise.

CMOS devices tend to have higher radiation resistance because the photogenerated charge is read out immediately from each pixel, rather than receiving prolonged radiation exposure while clocking across an entire CCD prior to readout. Therefore, the Rochester design uses low-power CMOS circuits arranged in high-density packaging within individual pixels to further enhance radiation resistance.

“The effects of radiation are vastly reduced because of a number of features of our design,” Figer says. “First, we convert charge in a pixel at that pixel, rather than transferring it across thousands of other pixels, as in a CCD. Second, our measurement is purely differential. So a charge hit by radiation can be easily identified as a huge, sudden spike in the signal and removed in real time. Note that in a CCD, once a pixel is hit, its signal for that exposure is worthless. Finally, because our circuit is highly differential, it is not subject to long-term voltage drifts due to radiation damage.”

The researchers achieve CCD-comparable read-out noise by sampling the signal using a sigma-delta analog-to-digital (A/D) circuit with a feedback path that restores charge to the charge-collection node. The new detector is based on a patented technology invented by Zeljko Ignjatovic and colleagues at the University of Rochester, and commercialized through Signal Sciences (Rochester, NY).

So far, the team has fabricated and measured performance in early design prototypes. The researchers expect to ultimately achieve read noise on the order of 0.3 electrons, less than a third of the noise of current CCD technology, and power consumption of 0.88 nW per pixel, three orders of magnitude less than CCDs and more than one order of magnitude less than current CMOS technology.

Equipment such as this dewar in the RIDL lab will enable testing of the overall system to determine how the sensors hold up in cryogenic environments. (Courtesy of Rochester Institute of Technology)
Click here to enlarge image

During the course of the three-year project the device will be tested at the RIDL, a new facility established to develop detector technologies for next-generation ground-based and space telescopes (see figure). In addition to Ignjatovic, Figer’s team includes Zoran Ninkov from RIT, Melissa McGrath from NASA Marshall Space Flight Center (Huntsville, AL), and Shouleh Nikzad from NASA Jet Propulsion Laboratory (Pasadena, CA).

Hassaun A. Jones-Bey

Hassaun A. Jones-Bey is a freelance writer living in California; e-mail: mailto:[email-masked].

Thu Nov 01 00:00:00 CDT 2007

| Add RSS Feed

More November, 2007 Articles >

Search Archives >

Laser Focus World Article Categories:

Web Exclusives

Online Features

Industry News

Product Highlights

Technology News

Current Issue Table of Contents

Search Products Buyer's Guide >

Search Industry Specs >

Search Industry Jobs >

Magazine & E-Newsletter Subscriptions >

ADVERTISEMENT

Middle

Subscribe

Archives

World News RECENT ARCHIVES

BIOMEDICAL OPTICS: International congress lays the groundwork for biophotonics roadmap

DISPLAY OPTICS: Contact lens could create virtual display

FREQUENCY CONVERSION: Oscillating RGB emission forges white-light laser

LASER PHYSICS: Random lasing needs no boundaries

MATERIALS SCIENCE: Ultrafast laser reveals nonreciprocal photosensitivity

featured webcasts

Recent Advances In Pulsed High-Power Fiber-Laser Systems

Original broadcast on
March 31, 2008

Vibration Control: Principles and Criteria for Isolation of Vibration-Sensitive Objects

Original broadcast on
October 31, 2007

Optical Coating Performance in Systems

Original broadcast on
September 26, 2007

View all Webcasts

White Papers

Cleaning Optics
(02/15/2008)

Will a Telecentric Lens Optimize My Machine Vision System?
(04/07/2008)

Why Use Edge Blackened Optics
(02/15/2008)

Visual Color Matching
(01/31/2008)

Inside Filters
(01/31/2008)

Utilizing Aspheres in Optical Design
(02/29/2008)

White Paper Categories:

Detectors and Imaging

General

Optics

View More White Papers

Volume 44 Issue 5
May, 2008

Current Issue
Issue Archive

ADVERTISEMENT

Right1

Right

Right2

Right3

Bottom1

Bottom2

Bottom3

Top

Home |
About Us |
Contact Us |
Site Map |
Advertise

View all PennWell sites |
View all PennWell events |
PennWell

Also visit: Industrial Laser Solutions |
Vision Systems Design |
Military & Aerospace Electronics |
BioOptics World

Copyright © 2007: PennWell Corporation, Tulsa, OK; All Rights Reserved. |
Privacy Policy |
Terms & Conditions